All-about-Test

1. Lock-in in Amplifier based Amplitude and Frequency Modulation and Demodulation: (General T&M); ... narrow sidebands. All the amplitude and phase components are individually acquired, each with adjustable filter settings. Likewise, for signal generation each frequency component can be individually set ...; Created on 24 April 2018
2. High-precision Frequency-selective Power Sensor: (General T&M); ... – a common mobile communications application. Predefined filters, e.g. in accordance with 3GPP specifications such as LTE, are provided. Diverse autoset functions simplify operation. For example, the measurement ...; Created on 11 April 2018
3. Test of LTE Cat-M1 and NB-IoT Devices ...: (Board test); Test of LTE Cat-M1 and NB-IoT Devices 04 April 2018 – Anritsu Corporation introduces multiple software packages for its Radio Communications Analyzer MT8821C that support emerging LTE Category M1 (LTE ...; Created on 03 April 2018
4. Testing Service for CMOS Image Sensor Wafers: (Component Test); ... ased test solution provides a large (80x100mm), uniform (+/-2%), high-intensity illumination field up to 10K Lux at a range of colour temperatures. Built-in IR filtering prevents sensor damage. Its ab ...; Created on 28 March 2018
5. Test of 6DOF Gyro Sensors in Singulated Packages: (Component Test); ... the high production volumes, the solutions based on gravity or pick-and-place handlers are a well-accepted alternative for mid-sized volumes, which often result from the very fragmented MEMS/sensor market.” ...; Created on 21 March 2018
6. Oscilloscope Probes for Power Electronics Measurements: (General T&M); ... unable to isolate.” If 4 GHz bandwidth is not necessary, the R&S RT-ZPR20 probe with 2 GHz bandwidth is an attractive alternative. www.rohde-schwarz.com/ ...; Created on 19 March 2018
7. Current Clamps for Multimeters: (General T&M); ... in low-power tertiary or industrial applications. Small and compact, the MINI 102 current clamp is an ideal complement for any multimeter to measure alternating currents in low-power tertiary or industrial ...; Created on 26 February 2018
8. High-Speed RF Measurements for NB-IoT Devices: (Board test); ... Test Set designed for the mass-production of wireless communication devices, including 2G/3G/LTE/LTE-A, W-LAN, Bluetooth, GPS and FM technologies. Up to four high-performance test units can be installed ...; Created on 15 February 2018
9. Independently certified eCall Test Solution: (Board test); ... the company is also developing test features for the next generation eCall over LTE system and making the corresponding solution fit for the future and for testing new vehicle telematics units. Along with ...; Created on 05 February 2018
10. Evaluation of Gigabit LTE and Cellular IoT ...: (Board test); Evaluation of Gigabit LTE and Cellular IoT 07 February 2018 – Anritsu Corporation announced a range of software options for the Signalling Tester MD8430A that expand the LTE-Advanced Pro (LTE-A Pro) ...; Created on 05 February 2018
11. Add 24 High Resolution Channels to your Oscilloscope: (General T&M); ... with ~0.05% total accuracy. Built-in filters with settings as low as 100 Hz further reduce noise. Adjustable gain ranges (1 mV to 10 V/div) accurately acquire a wide range of signal levels. The SAM40 ...; Created on 29 January 2018
12. Automotive Test Functions for MSO Oscilloscopes: (Board test); ... general manager, Mainstream Oscilloscopes at Tektronix. “Unlike alternatives that are limited to four channels, the 5 Series MSO gives customers the ability to synchronously capture much more information ...; Created on 24 January 2018
13. Low-Profile Oscilloscope for Rackmount Instrumentation: (General T&M); ... Profile offers significant advantages compared to alternative solutions currently on the market, including: More scope, less space – Conventional benchtop oscilloscopes used for machine diagnostics applications ...; Created on 10 January 2018
14. EMI Tent Enclosures for Benchtop Precompliance Tests: (General T&M); ... shielded tent has been designed with two layers of conductive fabric, suspended on rigid aluminum supports, the double-layer design significantly improving the tent's shielding effectiveness. A filter pan ...; Created on 08 January 2018
15. Single-phase AC and DC Power Meter: (Board test); ... IEC/EN 62000-3-2 / 4-7 Standard USB (USBTMC-Compliant), GPIB, RS232 and LAN interfaces Line and frequency filter capability for reducing unwanted signal noise Optional universal breakout box to simplify ...; Created on 14 December 2017
16. PC Software for EMC Pre-compliance Testing: (Board test); ... or Peak / Quasi Peak or alternatively a fast Quasi-Peak scan of critical peaks. FEATURES numerous pre-configured project files for CISPR-xx (EN550xx) emission measurements graph supports two complete ...; Created on 06 December 2017
17. Fast and easy Signal Processing for Digitizers: (General T&M); ... is exactly the same as most signal processing jobs. For example, the processing tasks of data conversion, filtering, averaging, baseline suppression, FFT window functions or even FFTs themselves can all ...; Created on 04 December 2017
18. Portable Network Analyzer and Spectrum Analyzer: (General T&M); ... R&S FPL1000 spectrum analyzer Rohde & Schwarz offers flexible solutions for the most important RF measurements. These include the characterization of components such as antennas, attenuators, filters and ...; Created on 19 November 2017
19. Handheld Analyzer supports Signal Demodulation and Vector Signal Analysis: (Service/Maintenance); ... wide area networks and other formats for the internet of things (IoT) Cellular communications including LTE, WCDMA and GSM “With increased spectral density and complex signal waveforms, engineers ...; Created on 12 November 2017
20. Isolated Current Probe for Oscilloscopes: (General T&M); ... a bandwidth of 1 MHz, multiple filters, 8-hour battery life, etc. The MH60 sensor is designed for use with an oscilloscope in total simplicity. Simply clamp the cable and measure. It can be used for wide-band ...; Created on 30 October 2017
21. Solid State Field Generating Systems: (General T&M); ... The products offer a very attractive alternative to using Traveling Wave Tube Amplifiers (TWTAs) driving separate antennas to generate field strength up to 50 V/m. Performance characteristics of this ...; Created on 15 October 2017
22. High-Throughput 1 ns Pulsed IV Memory Test Solution: (Component Test); ... Systems (CIES) STT-MRAM activities which resulted in a successful outcome as announced in March of 2015,” said Masaki Yamamoto, general manager of Keysight’s Wafer Test Solutions. “Our customer experiences ...; Created on 09 October 2017
23. Wireless Communication Measurements according to ETSI Standards: (Board test); ... In addition, traditional receivers need the use of a notch filters due to their lower dynamic range. Hence, the FFT based measurement systems hold a clear advantage over traditional receivers for performing ...; Created on 09 October 2017
24. Signalling Tester supports LTE-Advanced 1-Gbps IP Throughput Evaluation ...: (Board test); Signalling Tester supports LTE-Advanced 1-Gbps IP Throughput Evaluation 02 October 2017 – Anritsu Corporation enhanced the functionality of the Signalling Tester MD8475B all-in-one base station simulator ...; Created on 01 October 2017
25. Monitoring of Wireless Signals in Real-Time: (Board test); ... for measuring complex data signals such as Wi-Fi and LTE. Sophisticated FPGA-based digital signal processing within the RTSA7550 enables the capture of elusive time-varying signals across an instantaneous ...; Created on 25 September 2017
26. High-Speed Data-Transfer for advanced Waveform Analysis: (Board test); ... supports 5G standards currently under development by 3GPP, as well as legacy technologies such as LTE, W-CDMA, TD-SCDMA and GSM. www.anritsu.com/ ...; Created on 18 September 2017
27. Integrated Cellular + WiFi Protocol Verification Solution: (Board test); ... ing of coexistence challenges as devices interoperate across LTE and Wireless LAN systems." "Customers can view the performance of the complete protocol stack with the end-to-end performance verific ...; Created on 12 September 2017
28. Field Strength Measurement for LTE-TDD ...: (General T&M); Field Strength Measurement for LTE-TDD 07 September 2017 – Narda Safety Test Solutions has added the LTE-TDD option to the latest generation of its highly specialized SRM-3006 Selective Radiation Meter. ...; Created on 06 September 2017
29. 3GPP RF/RRM Compliance Test for NB-IoT and Cat-M1: (Board test); 3GPP RF/RRM Compliance Test for NB-IoT and Cat-M1 06 September 2017 – Keysight announced an agreement with Sequans Communications whereby Keysight will use Sequans’ Monarch LTE for IoT chip platform ...; Created on 04 September 2017
30. Compact Vector Network Analyzer for S-Parameter Measurements: (Component Test); ... RF measurements to characterize components such as antennas, attenuators, filters and PCBs. The new standalone instrument weighs only 6 kg and has a footprint of just 408 mm x 235 mm, saving up to two ...; Created on 27 August 2017
31. USB Power Delivery and USB Type-C Compliance Tests: (General T&M); ... also enhanced to support 4-lane DisplayPort signaling for USB Type-C devices that support Alternate Modes. The Teledyne LeCroy Voyager M310P will begin shipment in August 2017. www.teledynelecroy.com/ ...; Created on 20 August 2017
32. Cantilever Contactor Design for MCU and ASIC Testing: (Component Test); ... matches existing spring pin test boards and provides self-cleaning wipe. MiCon is a spring pin footprint compatible alternative supporting advanced temperature requirements as well as advanced power/current ...; Created on 09 August 2017
33. Spectrum Instrumentation increased Product Warrenty to 5 Years: (General T&M); ... eaking countries but was hard to say in others. This resulted in us just being called Spectrum, which we could not build a brand on. This was particularly apparent in America, which is why we chose the name S ...; Created on 26 July 2017
34. NI CompactDAQ supports Time Sensitive Networking (TSN): (General T&M); ... accurate synchronization over long distances, which greatly simplifies customer setup and systems management of high-channel-count and distributed systems,” said Todd Walter, chief marketing manager of ...; Created on 24 July 2017
35. Signal Analyzer Solution for 5G and Wideband Signal Measurement: (Board test); ... LTE, W-CDMA, TD-SCDMA, and GSM, it also offers futureproof support for the new 5G NR standards now being defined by 3GPP. www.anritsu.com/ ...; Created on 23 July 2017
36. SAS 4.0 Analyzer and Jammer Platform: (Board test); ... verifying 24Gb/s SAS controllers, devices and systems. Building on the capabilities of the industry's first SAS/SATA error injection system, the InFusion option can programmatically alter or corrupt traffi ...; Created on 19 July 2017
37. Compliance Testing for DisplayPort 1.4, Type-C and New HBR3: (Board test); ... Competitive alternatives are significantly slower, offer limited debug support, and lack pre-recorded mode signal analysis. There is only one comprehensive solution for DisplayPort test and debug today ...; Created on 17 July 2017
38. Wideband Waveform Generation and Measurement Technology for 5G Test Applications: (Board test); ... engineers can use the same VST-based test systems currently testing LTE-A and LTE-A Pro products today, to test 5G products in the future.” NI’s new technology for 5G test supplements a comprehensive ...; Created on 15 July 2017
39. Vector Signal Transceiver for Transceiver Test Applications: (Board test); ... chipsets as well as envelope tracking of digitally pre-distorted waveforms for power amplifier, and generation and analysis of new wireless standards such as 5G, 802.11ax and LTE-Advanced Pro. Product ...; Created on 03 July 2017
40. RF and Protocol Conformance Tests of 3GPP-Compliant LTE Mobile Terminals ...: (Board test); RF and Protocol Conformance Tests of 3GPP-Compliant LTE Mobile Terminals 30 June 2017 – Anritsu released the ME7800L, a Simple Conformance Test System, which enables simple and cost-effective RF and ...; Created on 28 June 2017
41. Quick and easy DVB-S2 and DVB-S2X Satellite Transmission Tests: (Board test); ... ETSI EN 302 307-2 V1.1.1 and allows users to test components such as amplifiers and filters, complete modules and receivers integrated in terminal devices. With a maximum output frequency of 40 GHz, ...; Created on 26 June 2017
42. Multi-Channel Signal Generation with up to 24 fully synchronous Channels: (General T&M); ... l process that can be generated internally or, alternatively, from an external clock or reference. Time skew between the channels is also minimized with the maximum skew, between all channels, being le ...; Created on 26 June 2017
43. AXI System optimized for shorter Cycle Times and faster PCB Handling: (Board test); ... balls even more reliably. New filter options provide additional image optimization. In addition, the necessary test program generation time for the system software PILOT AXI was further shortened. www.goepel.com ...; Created on 14 June 2017
44. IoT Carrier Acceptance Test System facilitates IoT Integration: (Board test); ... s and their typically cost-sensitive applications. The tester handles cellular technologies such as LTE as well as WLAN and Bluetooth. For end-to-end application testing, the R&S CMW290 can simulate a cellul ...; Created on 14 June 2017
45. USB-based 6 GHz Vector Network Analyzer: (General T&M); ... contributions from feed lines, probes or test jigs can be eliminated using manual or automatic reference plane offset including, when required, fully independent offset for each S-parameter. Alternatively, ...; Created on 04 June 2017
46. Boxcar Function smooths out Noise to give clear Signals: (General T&M); ... and SNR measurements are also better by more than 12 dB.” The downside of Boxcar averaging is that the averaged waveforms are effectively filtered so that some high-frequency signal content may be lost. ...; Created on 23 May 2017
47. Test Cases for Validation of GCF RF NB-IoT and CAT-M: (Board test); ... our customers as the technology evolves.” The Keysight T4010S test system is a complete solution covering LTE/LTE-Advanced RF and RRM to RF NB-IoT/Cat-M test capabilities according to 3GPP standards ...; Created on 20 May 2017
48. Conformance Test System with first Cat-M1 Test GCF Certification: (Board test); Conformance Test System with first Cat-M1 Test GCF Certification 15 May 2017 - Anritsu announced that the LTE-Advanced RF Conformance Test System ME7873LA has won the first GCF certification for the ...; Created on 12 May 2017
49. New Software for PCIe Protocol Analyzers: (Board test); New Software for PCIe Protocol Analyzers 09 May 2017 - Teledyne LeCroy announced LinkExpert, a new alternative software interface for its PCI Express (PCIe) protocol analyzer line of products. LinkExpert ...; Created on 07 May 2017

Main Menu

Newsletter

News Area

Info Area

Weblinks

Product Focus

Upcoming Events

Tag Cloud

Social Media